Shure Beta 98a/c Miniature Cardioid Condenser Microphone

 
(0 reviews)  

Shure Beta 98a/c Miniature Cardioid Condenser Microphone

SKU BETA-98A/C
Weight 2.00 lbs
$199.00
Quantity

This is for 1- New Shure Beta 98A/C Mini Condenser Microphone.  The Shure Beta 98A is a precision-engineered compact, high-output miniature condenser microphone for professional sound reinforcement and studio recording. An extremely uniform cardioid polar pattern provides excellent gain-before-feedback and off-axis rejection of unwanted noise.

 

The Beta 98A configurations features high sound pressure level capability (SPL).  It includes a A98D drum mount with flexible gooseneck that makes it an essential, accurate choice for toms, snares, and percussion.  The Beta 98A/C is recommended for a variety of acoustic or amplified instruments including drums, piano, reed, wind, and strings.

 

Includes:

 

1- Shure Beta 98 A/C microphone

1- Zippered Carry Bag

1- In-Line Preamplifier (1 piece)

1- Snap-fit Windscreen

1- Shock-Mount Swivel Adapter (Beta 98A/c)

1- 7.6 m (25ft) light-weight cable (Beta 98 A/C)

1- Beta 98 Drum Mount (Beta 98AD/C)

1- 4.6 m (15 ft) Heavy-Duty Cable (Beta 98AD/C)

 

 

Precision-Engineered Performance for Demanding Environments.

For over two decades, Beta Microphones have been the choice of top touring and recording professionals for capturing fine details in demanding acoustic environments.  Each specialized model is precision-engineered for focused, accurate reproduction of the intended source.  Recognized for their superior construction, low handling noise and high gain-before-feedback, Beta Microphones redefine sensitivity and control for essential, expert sound reinforcement.  Ideal for Critical live and studio applications.

 

Features:

  • Uniform cardioid polar pattern provides maximum gain-before-feedback and rejection of off-axis sound for smooth high-end response and control
  • Frequency response tailored for drums and percussion applications with a wide dynamic range for use in high SPL environments
  • Precision-engineered design for unobtrusive microphone footprint
  • Beta 98A models ship with external in-line preamplifier for discrete cable placement, snap-fit windscreen, and zipper pouch
  • Beta 98AD/C ships with A98D drum mount featuring a flexible gooseneck for precise placement and secure attachment
  • Beta 98A/C ships with RK282 shock mount swivel adapter for attachment to any standard microphone stand

 

Specifications:

Type

Electret Condenser

 

Frequency Response

20 to 20,000 Hz

 

Polar Pattern

Cardioid

 

Output Impedance

179 Ohms

 

Sensitivity (at 1 kHz, open circuit voltage)

–48.0 dBV/Pa (4.0 mV)

 

Maximum SPL (1 kHz at 1% THD)

1000 Ohm load: 144 dB

 

Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz)

64 dB

 

S/N ratio is difference between 94 dB SPL and equivalent SPL of self noise, A-weighted

 

Dynamic Range (at 1 kHz)

1000 Ohm load: 114 dB

 

Common Mode Rejection (20 Hz to 20 kHz)

> 50 dB

 

 

Clipping Level (1 kHz at 0.25% THD)

1000 Ohm load: 1.0 dBV (1.26 V)

 

THD of microphone preamplifier when applied input signal is equivalent to cartridge output at specified SPL

 

Self-Noise (typical, equivalent SPL, A-weighted)

30 dB SPL

 

Polarity

Positive pressure on diaphragm produces positive voltage on pin 2 with respect

to pin 3

 

Weight

Net: 12 g (0.6 oz.)

Connector

Three-pin professional audio (XLR), male, balanced

 

Power Requirements

11-52 Vdc phantom, 3.6 mA

 

Frequency

Cardioid Polar Pattern

Picks up the most sound in front of the microphone and some from the sides.  Less susceptible to feedback in high volume environments.

 

Tailored Frequency Respone

Smooth, extended response.  Tuned to accentuate specific types of instruments, or voices.

 

Applications 

Percussion

Rack/Floor Toms

Snare Drum

Piano/Organ

Woodwinds

Orchestra/Strings

Brass/Saxophone 

 

 

: *
: *
: *
Type the characters you see in the picture:


*
Audix MICROBOOM24 24" Microboom System microphone boom pole
Levy's Leathers MM1-TAN Leather Guitar Hanger
Sennheiser ew152G3 Wireless Headworn Microphone System (Headset Mic)
On-Stage Stands DM50 Drum Rim Mic Clip - 3pk
Shure WA303 - 2' Standard Guitar Cable with 1/4-Inch Connector on Each End
Peavey Large Rubber Feet (0051610) Set of 4
Audix MICROBOOM24 24" Microboom System microphone boom pole
$145.00
Levy's Leathers MM1-TAN Leather Guitar Hanger
$7.89
Sennheiser ew152G3 Wireless Headworn Microphone System (Headset Mic)
$649.95
On-Stage Stands DM50 Drum Rim Mic Clip - 3pk
$37.69
Shure WA303 - 2' Standard Guitar Cable with 1/4-Inch Connector on Each End
$9.50
Peavey Large Rubber Feet (0051610) Set of 4
$9.62
There have been no reviews


Recently viewed

Shure Beta 98a/c Miniature Cardioid Condenser Microphone
Shure Beta 98a/c Miniature Cardioid Condenser Microphone
$199.00